Wedge wire Cross-Flow Sieve Panels

    Wedge-wire screens can be fabricated in a range of both flat panels and tubes. Wedge-wire and support profiles are resistance welded with accurate slot dimensions. The screens can be mechanically and electropolished, and given additional surface hardening treatments.
    The dewatering capacity of a wedge wire cross flow sieve bend screen is primarily influenced by the screen width, the slot opening, and the wire size (width). Installation angle, feed velocity and uniform distribution across the screen are also very important.

usages for Wedge wire Cross-Flow Sieve Panels:

1.) Widely used in vairous kinds of medium filtering
2.) As the fitting using in the water-treating equipment;the environment protection; the sea water transforms into the industrial water and life use water desalination treatment; running water treatment; softening treatment;
3.) The petroleum industry: the petroleum product terminal filters and the chemical acid; the alkali liquid filters, the ethyl alcohol;
4.) The organic solution recycling filter

characteristic for Wedge wire Cross-Flow Sieve Panels:

1.) Wedge wire screen style isn't easy to be locked
2.) Due to the different pressure between inside from outside,it could be very easily to clean the plugging material.
3.) We are eager for long-terms cooperative parters ,our factory promise the best quality to have a high filtering accuracy, high strengh and durability
4.) We have the most advanced equipments and the most professional workers , so totally could be as per customer's drawing to produce new styles .

Feature for Wedge wire Cross-Flow Sieve Panels:

Screening efficiency and solids capacity are directly related to the length. Longer should be considered for feed containing a high percentage of solids. The dewatering capacity of flat cross flow dewatering screens can be greatly increased by tilting the wedge wires. The wedge wires are tilted 2 to 7 degrees depending on the wire size and slot opening.
The effective range of slot openings for a gravity-fed cross- flow screens is generally considered to be .015" to 1/8".
The installation angle of a flat cross-flow screen is usually 60 to 70 degrees from the horizon. The point of size separation for this installation angle is approximately 50% of the slot opening size. 

• 
  Belt Filter Press
• 
  Cossette Screens
• 
  Support Grids
• 
  Wedge Flapper Screens
• 
  Harp Screens
• 
  Vee-Wire flat screens
• 
  Johnson Screens Custom Lighting
• 
  Johnson Screens Column Covers
• 
  Static Screens
• 
  Dewatering Screens
• 
  Vibrating Screen Panels
• 
  Profile Bar Screens

more Congeneric Products..