Sintered Filter>>Sintered Metal Mesh Filter>>Sintered Poremet Filter Element
Sintered Poremet Filter Element
- Category:Sintered Filter
- Material:Sintered Wire Mesh
- Properties:sintered metal mesh filter
- Application:Filter (chemistry),Oil filter,Water Filter
if you are interested in receiving more information or have a question regarding any of our products please fill out the form above and we will contact you within 24-48 hours.
We highly appreciate your feedback. E-mail: sales@ubofilter.com
- Description
- Specification
- Packaging&Delivery
- Recommend Products
Sintered Poremet Filter Element
It is a porous metal panel which consists of multiple meshes and is sintered (diffusion-bonded) into one panel. It usually consists of protection mesh, filter mesh and support mesh and its combination is depending on needs or requirements.
Standard Specification
P2, P5, P10, P20, P40, P75, P100
Material : SUS 304, SUS 316, SUS316L
Dia. (mm) : φ25, φ50, φ75
Length (mm) : 250, 500, 750, 1000
Applications of Sintered Poremet Filter Element
Gases (Natural gas, Hydrogen, Nitrogen etc.)
Oils (Crude oil, Fuel oil, Hydraulic oil, Cooking oil etc.), Solvents, Steam, Air, Liquid etc.
Other specification is available depending on needs or requirements
Standard sintered wire mesh panel, "Poremet''
“Poremet” is our standard products of sintered wire mesh panel which is well designed for multi purposes and usually consists of five (5) layers of meshes;
First layer: 100 mesh as protection,
Second layer: filter mesh which varies on requirement,
Third layer: 100 mesh again as protection,
Fourth layer: 12/64 mesh as support,
Fifth layer: 12/64 mesh again, but placed cross to the fourth layer.
The standard sizes of “Poremet” panels are,
500 mm x 1,000 mm,
1,000 mm x 1,000 mm,
1,200 mm x 1,200 mm
