Nickel-based powder sintered filter plate
Nickel-based powder sintered filter plate
1.Generally used in the processing of nickel and nickel alloy powder metal
porous filter element is made
2.This form'permeability coefficient match with 2 mm thickness element
3.The product's performance achieve or exceed GB
4.Materials are pure nickel filter elements, high temperature alloy Inconel600 filter
elements, filter elements Monel
5.High-temperature alloys allowed in≤1000 degrees with working conditions,Nickel
monel allowed in ≤550 degrees with working conditions.
6.Provides tubular, plate, sheet, discoid, ring, rod, cone and plate, strip.
Ubo Filter Co.,Ltd could supply stainless steel filter elements,filter element, filter disc, sintered filter,filter strainer,polymeric filter,basket filter, wire mesh filter ,pleated filter
Sintering
After the removal of the compacted part, the sintering is carried out in special suitable furnaces.
Sintering, the fundamental processing step for all porous metal products, means bonding of powder particles through diffusion at temperatures well below the melting point. In any micron range, after the sintering process, no physical limits between the original metal powder particles are any longer in existence. The grain boundaries run over the original particle boundaries.
Sintering gives the high porosity material its shape-stability and properties of a metallically strong component.
The pores after the sintering process are mechanically fixed in respect to size and position.
Common Applications:
Catalyst separation and recovery
Polishing of corrosive liquids and gases
Process steam filtration
Precoat filtration
High-temperature liquids and gases
Cryogenic fluids
Solvents, ketones, esters, amines, liquid hydrocarbons, polymers
Guard filtration for fixed bed reactor
Process steam filtration
Catalyst recovery from hydrogenation reactors
Polishing of syrups, liquors and other liquids
Catalyst removal from flavor ingredients and other food specialties
Activated carbon removal, decolorization
Gas Filtration
Aerosol separation
Silencing
Fluidization
Sparging
Please contact us for information and quotes on these other porous products:
Discs: from 1/16" to 11" OD
Cups and Bushings: up to 2" OD, 3" length
Plates: up to an 7" x 11'' continuous piece. Larger sheets welded together.
Flow Control Devices: examples include flow restrictors, vent plugs and delay valves
Breathers and Pressure Equalizers
Flame Arrestors: block flames with porous structure
Rollers and Applicators: uniform porosity ideal for applicators and roll handling equipment
Spargers: increase surface area when introducing gas into liquids
Fluidizers: enhance material flow characteristics
Gauge Snubbers: provides a dampening effect on pressure spikes
Silencers: muffle noise while allowing free flow of escaping gases